Specs
Stencil Press specs
Setup notes and briefing numbers for Stencil Press.
Stencil aperture and print limits
Stencil Press specs covers stencil printing requirements within an SMT line. It helps the team compare printing setup details with the boards and paste process already planned for production. Check it when you need machine-specific print information rather than a broad line description.
Stencil Press specs focus on print accuracy before placement starts. The notes cover stencil thickness, aperture transfer, squeegee pressure and board support details that affect paste volume on fine-pitch and larger pad designs. Inland and coastal conditions both matter, especially where paste handling changes with workshop temperature and humidity.
Before a run begins, record the stencil ID, paste batch and underside cleaning interval against the board code. A quick check of rail width, tooling pins and fiducial recognition helps prevent misprints that only appear after the first few panels. Keep the print sample with the shift records so the next operator can compare deposits properly.
Stencil printing details
Use these notes when the question is about the printer itself, not the full SMT line. Typical checks include snap-off setting, print speed, separation speed and support placement under heavier boards or uneven component keep-out areas. The aim is to match the stencil printing setup to the paste process and pad geometry planned for production.
If a board is giving paste bridges, insufficient deposits or edge smearing, compare the printer settings here with the matching line record before changing multiple variables. Tell us the board dimensions, the foil you print with and the paste you run, and we will check the press fits. That gives the team a usable reference instead of a general fault description.
- Stencil thickness by board type
- Squeegee pressure and speed checks
- Check Lines rail limits, Reflow paste profile, Board notes pad pitch
- Print records with board references
Workshop conditions affecting paste print
Coastal air can shorten open paste performance and increase attention on stencil cleaning frequency. On Highveld sites, fine dust around the line makes cover discipline and cleaning routines more important for stable print quality. Where power interruptions are common, note exactly when the paste was loaded and how long the board queue stood before printing resumed.
For South African production teams, printer setup often has to fit mixed batch sizes rather than one long automotive-style run. Older factories may need extra focus on bench vibration, compressed air quality and lighting over the print area. Those details influence whether a specification works on the day shift and again on the next handover.
Operated by Astros Marketing (Pty) Ltd from 2 Makro Place, Sunnyrock 1401.
Data needed for printer review
Send the board name, panel size, stencil foil thickness and the pads giving trouble. Add the current squeegee type, print speed and wipe cycle so the setup can be compared against the fault pattern.
A useful note also includes paste brand, storage condition and the gap between thawing and first print. When available, attach SPI results or close photos from the first article so the print issue can be read against actual deposits.
What our SMT Line customers say
Verified Google reviews